Equipment

Equipment

Standard Practice Guide 520.1: Acquisition, Use and Disposition of Property (Exclusive of Real Property) provides guidance on the proper acquisition, management and disposal of equipment.

Equipment (including Musical Instruments) is capitalized and depreciated if it meets all of the following criteria on a per item basis:

  • Cost at or exceeding $5,000
  • Useful life of one year or greater
  • Freight, transportation charges and installation costs, if billed separately, are excluded from the cost of the asset.  

Financial Operations’ policy states that assets will only be retired in Asset Management when one of the following criteria have been met:

  • Item has been sold to an external entity,
  • Item has been traded-in towards the purchase of a new item,
  • Item has been scrapped as no longer useful,
  • Item has been transferred to another Institution or university,
  • Item has been destroyed (i.e. theft, fire, flood, damaged, etc.)
  • Item cannot be physically located (due to theft or inability to locate)

Please note that Financial Operations’ policy requires assets that are either partially or fully depreciated, but still in use, to remain in asset management until they are retired for one of the above reasons.  For more information on university policies regarding disposition of assets, see SPG 520.01.

Equipment Account Codes

Currently the university uses ten account codes to categorize moveable equipment purchases; See below for a list of the accounts with descriptions.  The Procurement system has category codes specifically for equipment; See below for list of purchasing category codes to use when ordering equipment through Procurement Services.

Account Account Description Account Long Description
614000 Equipment -greater than $5,000 To record capital equipment with an original cost of $5,000 or more and a useful life of one year or more.
614030 Equipment Cost Distribution To record the cost of equipment purchased by two or more separate chartfields.  The chartfields contributing the greatest share towards the purchase price of the equipment is charged for the entire cost of the capital equipment at an equipment account other than 614030, usually account 614000.  The same chartfields are credited at 614030 for the amount of all other contributions by all other chartfields.   The other chartfields are debited at 614030 to record their share of the cost of the purchase.  If there is a Federal Project/Grant involved the entire cost must be charged to, the Federal Project/Grant and cost shared from there.
614020 Prefabricated Structures To record the cost for prefabricated structures.
614050 Software > $500,000

To record cost of software that is greater than $500,000 to be capitalized.

If software is developed internally the costs should be recorded in the fund 81000 (Construction – Info Tech) or 81500 (Construction – Hospital IT) using the proper accounts for capital versus non-capital.  Further discussion on internally developed software is available in the Capitalization Guidelines for Campus Use.

614060 Equip Fabrication-Spon Only To record the non-labor cost of fabrications that is estimated to exceed $5,000. Upon completion of the fabrication, the total cost should be re-accounted to 614000 to be capitalized and included in the equipment inventory.  A set of separate chartfields is established to accumulate all non-labor costs. This account is generally used in Sponsored Funds but can be used in the Current Funds with consultation from Financial Operations. Fabrications are not allowed for equipment upgrades. 
614210 Equip – Upgrade Existing Equip To record cost of upgrades that increases the value and performance of a piece of equipment.  This will be added to the original cost of equip >$5K.  Minimum threshold of $5,000 per upgrade component.
614240 Equip – Federal Accountability To record equipment, whose title may revert under some named condition to an outside sponsor, usually a federal agency.
614300 Sponsored Owned Equipment To record costs of equipment purchased by the university, but title will rest with a sponsor.   Use of the equipment will remain with the intended project until the sponsor calls for it. Items will not be added to the U-M Asset Management System but will be monitored by Property Control
614330 Sponsor Owned Equip – Fab To record cost of a component that is added to the original piece of equipment or is a component of the original equipment owned by the sponsor.
615570 Musical Instruments> than $5k To record musical instrument purchases that cost $5,000 or more per unit, with a useful life of one year or more.

Purchasing Category Codes 

Category Code Category Description Account Account Long Description
EQPCL Equipment – Capital Lease 614105 To record and track all capital lease expenses. A capital lease is defined as purchase of a capital item on a payment plan
EQPCM U-M Equip Owned Fab – Spon Only 614060 To record the non-labor cost of fabrications that is estimated to exceed $5,000.  This account is to be used for Sponsored Funds only.
EQPFA Equip – Federal Accountability 614240 To record equipment, whose title may revert under some named condition to an outside sponsor, usually a federal agency.
EQPMS Equipment Operating Leases 614120 To record and track lease monthly payments.
EQPMT Equipment 614000 To record assets that cost $5,000 or more, with a useful life of one year or more.
EQPNI Clinical Equip Need Inspection 614100 To record costs of Health System capital equipment that needs inspection prior to patient service use by departments.
EQPPR Equipment Partial Replacements 614180 To record costs of a replacement, for a part that wears out or breaks within the original piece of equipment.  This cost is not added to the original cost.  Minimum threshold is $5,000.
EQPPS Prefabricated Structures 614020 To record cost for prefabricated structures.
EQPSC Sponsor Owned Equip – Fab 614330
To record cost of a component that is added to the original piece of equipment or is a component of the original equipment owned by the sponsor.
EQPSO Sponsored Owned Equipment 614300 To record costs of equipment purchased by the university, but title will rest with a sponsor.   Use of the equipment will remain with the intended project until the sponsor calls for it.
EQPTP Third Party Owned Equipment 614320 To record costs of equipment owned by a third party, purchased on federal projects.  Title will rest with a third party upon completion of the project.
EQPUE Equip – Upgrade Existing Equip 614210 To record cost of upgrades that increases the value and performance of a piece of equipment.  This will be added to the original cost of equip >$5K.  Minimum threshold of $5,000 per upgrade component.
EQPXE Xerox Equip Equity Payment 614090 To record lease payments related to the lease agreement program we have for printer and copiers.
GENMU Musical Instruments 615570 To record the purchase of musical instruments that cost $5,000 or more, with a useful life of one year or more.

Fabricated Equipment

Equipment fabrication is the process of constructing a piece of capital equipment that upon completion must have an expected useful life of one year or more and an estimated non-labor cost of building the equipment must be in excess of $5,000. 

If the equipment fabrication is related to a sponsored project grant a new Sub (FAB) Project/Grant should be opened through the Sponsored Programs Office.  If the equipment fabrication is related to a non-sponsored project/grant, it is recommended that a separate project/grant be established to track all the costs.

Allowable charges on a fabrication should use account code 614060 or 614330.  These expenses include non-labor costs of materials and supplies necessary to fabricate the equipment.

Unallowable charges on a fabrication that should not be charged to the fabrication project/grant and use an appropriate expense account codes that describe what is being purchased such as salaries, fringes, postage, telephone, copying, gas cylinder rentals, warranties, shipping, custodial charges and consumable items such as chemicals, reagents/gases.

Upon completion of the fabrication reach out to the Sponsored Programs Office or Financial Operations for assistance in transferring the fabrication in expenses to capital equipment expenses so that the item can be recorded in the university asset management system.

Key Unit Responsibilities:

  1. Ensure fabrication components are coded to account 614060 (for University owned equipment) or account 614330 (for Sponsor owned equipment)
  2. Notify Sponsored Programs (for sponsored fabrications) or Financial Operations (for non-sponsored fabrications) when the fabricated equipment is completed and in use
  3. Facilitate tagging and notify appropriate personnel within the department of the completed equipment as necessary.

Contacts: 

 

Equipment Trade-ins

A department/unit identifies the need/desire to trade in equipment towards the purchase of new equipment. They should contact Procurement who will work with them and the supplier to obtain the proposal for the trade-in. Procurement will perform the following steps to ensure the university and department receives a fair price for the trade-in and new piece of equipment. 

  • Contact Property Control to obtain clearance for all sponsor funded equipment (any equipment purchased on funds 20000 or 25000) that is to be traded-in.  No sponsor titled equipment can be traded-in.
  • Contact Property Disposition to obtain a Fair Market Value (FMV) analysis of the equipment being traded in after receiving clearance from Property Control and negotiate with supplier to settle on a fair trade-in value based on the FMV.
  • Obtain Declaration of Surplus (DOS) form from the department/unit
  • Attach the DOS and FMV to the Purchase Order of the new equipment.
  • Send all supporting documentation (DOS, FMV, New PO #) to Financial Operations, where the equipment that was traded-in can be removed from the asset management system and the newly purchased equipment added to asset management.

 

Equipment Warranty Swaps

An even warranty swap occurs when a piece of capital equipment (tagged asset) malfunctions or is in need of repairs that are covered under the warranty, obtained at purchase.  The following steps are required to ensure the capital equipment asset records are updated appropriately.

  • Contact the manufacturer to facilitate the warranty exchange with your department
  • Notify Property Control that a warranty swap is occurring
  • Property Control will follow up near the estimated delivery day
  • Property Control will send a tagger to tag the equipment and update the asset management system with the new information.

Contact Property Control with any questions at property.control@umich.edu.

 

Equipment Transfers between University Departments:

To process equipment asset transfers between university departments the following steps are required.

  1. Complete the asset transfer form (in the Resources section of the page)
  2. Obtain an email between both departments acknowledging the release and receipt of the equipment being transferred
  3. Send an email to amtransfers@umich.edu with the asset transfer form and approval email between the departments attached.

Once the above information is received and confirmed, Financial Operations will process the transfer in the asset management system.

 

What to do with Equipment claim checks from Risk Management:

When an item has been destroyed (theft, fire, flood, etc.), a claim through Risk Management should be processed.  Refer to Risk Management’s Property Insurance Coverage website for more details.  Property insurance coverage covers property losses associated with all campuses. Coverage provides for University of Michigan Owned or Leased Property – Replacement cost or actual cash value of equipment will be reimbursed upon receipt of a properly submitted claim.  Claims checks should be deposited to the Chartfield in which you are purchasing replacement equipment at account code 620130 to allow for proper accounting by Financial Operations within the general ledger and the asset management system.

Financial Operations needs proper documentation of a successful claim to remove an asset from service.  Please send the following documentation to amtransfers@umich.edu for processing:

  • A copy of the claim form from Risk Management
  • A completed DOS form with Risk Managements Short Code 947944 for the Credit if sold
  • Cash Receipt Number for the deposit of the claim check
  • Equipment tag number
  • PO number for the replacement equipment, if the equipment was replaced

How to Handle Affiliate-Related Assets:

The information below establishes guidelines around how to handle assets owned by affiliates of the University of Michigan as well as assets owned by the university but housed in affiliate space.  There are several possible scenarios surrounding these types of assets to be addressed.

Affiliate owned assets in affiliate owned space:

  • All assets will be recorded on the affiliates balance sheet and income statement as appropriate.
  • No assets will be recorded in the university’s asset management system.
  • Asset stewardship is the responsibility of the affiliate

Affiliate owned assets in university owned space:

  • All assets will be recorded on the affiliates balance sheet and income statement as appropriate.
  • No assets will be recorded in the university’s asset management system.
  • Asset stewardship is the responsibility of the affiliate

University owned assets in affiliate owned space:

  • All assets will be recorded on the university’s balance sheet and income statement as appropriate.
  • All assets will be recorded in the university’s asset management system.
  • The departments owning the assets are to follow university policies regarding equipment.
    • Proper recording of purchases in the general ledger as well as in asset management
    • Proper stewardship of assets through the inventory management process
      •  Location of assets in an affiliated maintained space must still be inventoried according to university policy.
      •  Arrangements may be made with the affiliate in question to handle inventory and other needs on a case by case basis.
    • Proper disposal of assets by following the University’s Asset Management Equipment Retirement policy